Tuesday, September 24, 2019

Myocardial Infarction Research Paper Example | Topics and Well Written Essays - 1750 words

Myocardial Infarction - Research Paper Example The area deprived of blood supply is said to have suffered ischemic injury. The ischemic injury, if severe enough to cause the complete block of oxygen and nutrients causes death of the heart tissue, which is termed as Myocardial Infarction (Guyton et al 200, Ganong 2005). Pathophysiology The blood vessels supplying the heart are called coronary arteries. There are three main coronary arteries which supply different areas of heart along with their branches. These are 1) Right coronary artery, 2) Left anterior descending artery, 3) Left circumflex artery. Above 90% cases of myocardial infarction occur as a result of coronary artery blockage, thus the disease is also referred to as coronary artery disease (CAD). The most common and dangerous cause of coronary artery obstruction, and thus MI is Atherosclerosis. Atherosclerosis refers to the narrowing of arteries because of accumulation of atherosclerotic plaques. These plaques are basically thrombi composed of lipid foam cells (choleste rol) and different cell components including smooth muscle, macrophages and collagen fibres. In most instances, the ischemic myocardial infarction is precipitated by the phenomenon called acute plaque change. Acute plaque change results from the rupture of pre-existing thrombi that partially occlude the lumen. The rupture exposes the underlying thrombogenic endothelium. The plaques are also termed as vulnerable plaques as they contain lipids in high amounts, along with collagen fibres and inflammatory cells. When ruptured, the reactivity of these components causes the inflammatory destabilization and result in the infarction (Libby P 2001). The acute phase reactant, C reactive protein (CRP) is thus found to be high during the acute myocardial infarction (Blake et al 2003). The infarction can occur in either of the two patterns, complete occlusion of a single coronary artery referred to as transmural infarct, which results in complete ischemia of the area supplied by that particular coronary artery. Subendocardial infarcts on the other hand occlude the arteries incompletely, and thus allow some perfusion. But since subendocardium is the least perused area of the myocardium, it is more prone to ischemic death. The aim of reperfusion is to save the viable muscle from necrosis (Huber et al 1996). The myocardial injury is reversible for up to 30 minutes after the ischemic attack, thereafter the injury becomes irreversible. The entire muscle becomes necrotic within six hours, if the collateral arteries are not well developed (Robbins et al 2005, Mohan 2007). Etiology of Myocardial Infarction The development of atherosclerotic plaques and pathogenesis of the process into the myocardial infarction is a complex one. It is a chronic disease taking years to evolve before it causes any modifiable consequences. The evolvement is subtle and the resultant damage is severe. The pathogenesis of the disease involves several factors. The balance among these factors in the long r un determines the outcome of the condition. These factors can either be modifiable or non-modifiable. The modifiable factors are the ones that a person can control by bringing about certain changes. They include controlling the level of fats in diet, cessation of smoking, regular exercise and maintaining the blood pressure in the normal range (Manson et al 1996). The hyperlipidemias, i.e. elevated low density

Monday, September 23, 2019

Research Paper Example | Topics and Well Written Essays - 750 words - 6

Research Paper Example The procurement industry takes care of the acquisition process that is involved with the goods and services right from order placement down towards invoice and payments. It is also known as the sourcing industry. The important phases of a procurement industry bank on the purchase planning phase, the determination of the standards which essentially need to be followed, the development of proper specifications, supplier research and selection methodologies, the analysis based on the provision of value, the financing measures, the price negotiation terms and conditions, the eventual purchase, the supply contract administering, the inventory control and storage methods and lastly the disposals and related functions. There are certain specifications which essentially define the basis of process capital equipments. These requirements are specified by an engineer as he tries to bring forward a need and thus ask the vendors who are aspiring to sell him the goods and services. These vendors also suggest equipments that could fill the need which arises on the part of the engineer or the buying party. The process capital equipment therefore comes about in full circle when all the needs are fulfilled and met in a holistic way. This brings to light the notion of procurement which is deemed as very essential right from the outset. Process capital equipment touches the salient basis of procurement regimes and hence asks for the relevant equipments so that the pertinent needs and requirements could be met in a corrective fashion. This is important as it sets the ball rolling for the procurement process and indeed helps in completing the process capital realms as well. Bulk solids handling allows for provision of comprehensive knowledge as well as timely information regarding the different aspects of dry bulk materials that are essentially handled

Sunday, September 22, 2019

BeckerKevinE2Phil100F2014 Essay Example for Free

BeckerKevinE2Phil100F2014 Essay Empiricism, or the belief that knowledge is achieved through the senses, was a popular belief amongst some of the greatest modern philosophers. Perhaps the most prominent Empiricists were John Locke, George Berkeley and David Hume, all of whom are regarded as some of the most influential philosophers of the last 500 years. Each of those philosophers can be considered Empiricists due to the importance of experience throughout their philosophical principles. More specifically, Lockes empirical views can be seen in his idea of the primary and secondary qualities of an object. Berkeleys empiricism is evident in his critique of Lockes concept of abstract ideas. Lastly, Hume can be considered as the most consistent empiricist of the group as he did not waver from experience being the source of knowledge and at the root of reasoning. His views are evident in his concept of humans having perceptions and impressions and his idea of â€Å"self†. John Lockes empirical views are evident throughout his philosophical principles. Locke believed that there were no such things as innate thoughts and that the only way a person could obtain  knowledge about something is through directly experiencing it. This is especially evident in his explanation of objects having primary and secondary qualities. Locke suggests that all things posses two qualities about them: primary qualities and secondary qualities. Primary qualities consist of traits that are completely within the object such as the shape of a ball. This primary quality about the ball will not change even when viewed from a different perspective because that is the physical structure of the ball. On the contrary, a secondary quality is a trait that requires perception by an observer. Secondary qualities are relative to the observer and change depending on the observers perspective or the physical differences between observers. For example, the color of the ball can change depending on the lighting in the room or due to an observer being color blind. In his 4th book of his Essay, Locke writes,â€Å"We cannot demonstrate the certain equality of any two degrees of whiteness; because we have no certain standard to measure them by, nor means to distinguish every the least real difference, the only help we have being from our senses, which in this point fail us. † (Locke, Book 4, Chp 2, #13). In other words, he is saying that the secondary quality of the color white cannot be scientifically quantified because each individuals perception of the color is different which prevents us from being able to determine the true â€Å"whiteness† of the given object. Locke makes this distinction between primary and secondary qualities in a response to the idea of innate thoughts, or thoughts that are naturally ingrained in our minds without having to experience them. Further, Locke is suggesting that innate thoughts are simply  common experiences. Locke also believed that the primary qualities of an object were things that could quantified and measured by the Newtonian science of the time. Lastly, Lockes concept of primary and secondary qualities indicates that he is an Empiricist because they show that he believes that we need past experiences in order to have an idea about different objects. Without experiencing the color red previously, we wouldnt have an idea of how red a ball is. George Berkeleys philosophical methodologies and principles reflect empiricist ideas as well. This is evident in his critique of John Lockes concept of abstract ideas. According to Locke, we can come up with an abstract view of, say a cat, by taking our experiences of many different cats and extracting from them common properties that all cats have. This abstract idea therefore applies to all cats despite their size, breed, or coat color. Berkeley argued that these abstract ideas cannot be thought about in our mind without creating an image of a particular cat in our minds. One cannot imagine a cat that is neither big or little, of no specific breed, or colorless. Berkeley addresses this idea in his book A Treatise Concerning the Principles of Human Knowledge, saying, â€Å"Whether others have this wonderful faculty of ABSTRACTING THEIR IDEAS, they best can tell: for myself, I find indeed I have a faculty of imagining, or representing to myself, the ideas of those particular things I have perceived. † (Berkeley, 10). In other words, Berkeley is saying that unlike others who claim to be able to come up with abstract ideas, he is only capable of imagining these â€Å"abstract ideas† with previous particulars that he already experienced at some point. The author of our textbook, William Lawhead summarized Berkeleys critique quite nicely, saying â€Å"We can think of, speak about, and imagine only particular things. † (pg 322). Furthermore, George Berkeleys critique of abstract ideas reflects his empiricist views because they show how important experience is to his concept of ideas. To Berkeley, one cannot come up with abstract ideas because we always draw on previous experiences to give us an idea of what were thinking about. This is a more strict version of Empiricism compared to Lockes. David Humes concept of perceptions are simply the contents of our consciousness, similar to what Locke would call an idea (Lawhead, 336). Hume further breaks down perceptions into two categories: impressions and ideas. To Hume, all original experiences are considered impressions. These impressions remain as â€Å"copies† in our mind and we draw upon them when we have a similar experience later on in life. These â€Å"copies† of the original impression are what Hume calls an idea. In his work, Treatise of Human Nature, Hume says â€Å"When we search for the characteristic, which  distinguishes the memory from the imagination, we must immediately perceive, that it cannot lie in the simple ideas it presents to us; since both these faculties borrow their simple ideas from the impressions, and can never go beyond these original perceptions. † (Hume, Section 5). In other words, Hume is saying that when one is trying to think about a characteristic of an object we always revert back to the original impression that we previously had in our mind from a past experience. Further, Hume is saying that even simple ideas about an object are faint memories of our previous experiences. David Hume can be considered the most consistent Empiricist especially when considering his idea on a persons perception of self (or lack thereof in this case). Lawhead described this simply by saying â€Å"Hume maintains that when we introspect we only find some particular perception of one sort another. If you focus on your experience right now you find puzzlement, tiredness, heat, anger.. What you dont find is a self. † (pg 340). This is an extremely empirical way of looking at ones self. Hume is such a consistent. Empiricist that he goes so far to say that we cannot have an idea of our self, because our minds always revert back to previous experiences of other perceptions. In addition to this, Hume suggests that we cannot even be certain about things such as the sun rising tomorrow. To Hume, the only reason that we know the sun will rise tomorrow is because of all of the past experiences and perceptions that weve had of the sun rising each morning. Therefore, we can only be certain of things that we have experienced. These two beliefs by Hume are evidence that he was the most strict Empiricist of the  group mentioned above. John Locke, George Berkeley, and David Hume can all be considered Empiricists due to the prevalence of experience in their philosophical principles.Lockes experience oriented principles can be observed in his idea of primary and secondary qualities of an object. Berkeleys can be seen in his critique of Lockes abstract ideas, which Berkeley suggests do not exist. Lastly, David Hume, who can be considered the most strict Empiricist, demonstrates his empirical views in his concepts of impressions and idea and his lack of self perception.

Saturday, September 21, 2019

Extra Curriculum Activities Essay Example for Free

Extra Curriculum Activities Essay An ideal school need more subject options such as drama, art and music—to excel at all levels. The school works provided to students by teachers have their own academic importance, Nevertheless that alone does not fulfil the schooling and learning requirements and standards. In some schools, the educational systems are only based upon fixed set of courses that excludes extra curriculum activities, causing insufficient or restrictiveness for the student’s comprehension skills and imaginations. Although it is believed that today’s schools have the best education system including extra curriculum activities, it is yet underestimated in many schools. These activities will bring many benefits to students. Involving students to participate in extra curriculum activities is very important in helping them to develop many skills such as working and social skills. Of course, while there are definitely a large amount of benefits to extra curriculum activities for students, there needs to be a balance between that and school work. Getting involved in a few different activities is a great choice to improve various skills and attitudes, and is definitely beneficial in all aspects, but too many activities can result in students having academic problems and more. Therefore, it is important for students to set some limits in being involved in extra curriculum activities. Also not every student is a mad scientist or a mathematician, so these extra subject choices give students a chance to develop skills in particular areas they are well in. Students learn about long term commitments when they are involved in extracurricular activities as well, which is another excellent benefit. When they join one of the activities or clubs, they commit themselves to that activity for a period of time. Learning to take on commitments is important, and these activities can teach students this important lesson. Many times, being involved in extracurricular activities helps to raise the self esteem of teens. There are many teens that feel worthless or that there is nothing they are good at. Teens struggle with self esteem, and these activities are a way that they can build self esteem. Everyone wants to find something that they are really good at, and extracurricular activities provide them with a way that they can get involved in something and really shine, giving their self esteem a boost. Getting involved in extracurricular activities also allows students to get involved in various interests. It is important for students to be very diverse in their interests. These activities allow them to explore a range of interests that they may have. Students should be allowed to take another step forward and be able to explore the world of art and music and to be able to nurture their talent and explore their own potential in other areas. There are numerous advantages for students to participate in extra curriculum activities. Therefore schools should be encouraged to involve students in these activities that increase the students’ self-worth, ability to think creatively, emotional understanding, social networks and overall increase their academic performances. With so many benefits and advantages, how can schools exclude extra Curriculum Activities?

Friday, September 20, 2019

Water and power consumption: Analysis of sewage treatment plant

Water and power consumption: Analysis of sewage treatment plant 1. INTRODUCTION: Waters unique Characteristics and its essential Role for all life have inspired myths and influenced cultures, religions, art, and literature through all times. The process involved for the RBC Biological Treatment method is named as FIXED FILM ROTATING BIOLOGICAL CONTACTOR BIOWHEELS. In this process by means of rotation of the bio wheels micro organisms are expected to growth in the RBC and the overflow from the Lamella clarifier will be the first stage of the treated water. The micro organisms will develop on the surface of the disk and the colonization of the organisms will take place because of the inlet load into the system. The thick film like formation in the surface of the disk is the indication of the growth. In Sewage water the main constituents of Pollutants being organic in nature these can be digested easily in the RBC. Sewage is created by institutions, residences, and hospitals and commercial and industrial establishments. Raw influent of sewage wastewater includes household waste liquid from the toilets, sinks, showers, kitchens, baths, and so forth that is disposed of sewage waste water. 1.1 Aim: The aim of the project is to Analysis of water consumption and power consumption of sewage treatment plant. 1.2 Objective: * To Analysis the water and power consumption of the sewage treatment plant * To vary the parameters of water source, power source. * To Analyze the Rotating Biological contactor Biowheels.Lamella clarifier * Analyzing 2D design of the Sewage Treatment Plant. * To analyze the results and propose appropriate solution. 2. BACKGROUND RESEARCH: Waste water collected from domestic and industrial communities must be returned to receiving waters or to the land. Although the collecting of storm water and drainage dates from ancient times the collection of waste water can be traced only to the early 1800s. The systematic treatment of wastewater followed in the late 1800s and early 1900s. There are many methods and processes to treat wastewater. The most common approach uses primary treatment (screening and clarification) to remove solids; aerobic, suspended growth, activated sludge secondary treatment to reduce organic pollutants; and chlorine disinfection to reduce pathogens. Secondary treatment is the largest energy consumer (30 to 60% of total plant usage), followed by pumping and sludge processing. Although suspended growth, activated sludge is the most common wastewater treatment process, it is not the most energy efficient. Aerated lagoons, trickling filters and rotating biological contactors are significantly more efficient. They are not as widely used because aerated lagoons require a large land area, and trickling filters and rotating biological contactors are better suited for smaller capacity applications. Many wastewater treatment plants are shifting from chlorine-based disinfection to UV disinfection to eliminate the risk of storage and handling of toxic chemicals. Although UV disinfection is energy intensive, it adds no chemical residue to the effluent. This feature is particularly important for discharge to sensitive aquatic environments or for wastewater reuse. In general, low pressure UV systems are substantially more efficient than medium pressure systems. Energy efficiency opportunities in wastewater treatment include the use of fine bubble diffusers, dissolved oxygen control of aeration, high efficiency blowers, variable frequency drives on pumps and blowers, premium efficiency motors, and the reduction of the head against which pumps and blowers operate. Sewage is generally a mixture of domestic of waste water from bath, sinks and washing machines and toilets, waste water from all industry and rainwater runoff from roads and other surfaced areas. Every day in the UK about 347,000 Kilometers of sewers collect over 11 Billion liters of waste water. This is treated about 9000 sewage treatment works before the treated effluent is discharged to inland waters, estuaries and the sea. Without suitable treatment, the waste water we produce every day would damage the water environmental and creates to affect the public health problems. Untreated sewage contains organic matter carbohydrates, fats and proteins, bacteria and chemicals. Bacteria naturally present in environmental waters do break these substances down, but in doing so they use the oxygen dissolved in this water. If there were large or continuous untreated discharges of urban waste water the result could be too little oxygen for fish and other aquatic life to survive. So the purpose of waste water treatment is to remove organic substances to protect the environment from these effects. Sewage works therefore reproduce what would be occurring in the environmental. Settling out much of the solid matter is called Primary Treatment, and using Bacteria that digest and break down the organic substances is called Secondary Treatment. Sometimes further treatment Tertiary is required to protect sensitive water environments; Tertiary treatment can involve disinfecting the treated effluent to protect the bathing and shellfish waters. It can also involve the removal of phosphorous or nitrates nutrients present in sewage. To protect the waters that is threatened by eutrophication. (ref sewage treatment in the UK defray department for environment food Rural affairs,PB 6655 March 2002.). 3. LITERATURE REVIEW: Municipal water use is generally divided into four categories, 1. Domestic water normally used for sanitary and general purposes 2. Industrial water used for nondomestic purposes, 3. The Public service water normally used for fir fighting, and system maintenance and also municipal landscape irrigation. 4. Unaccounted for system losses and leakage The following data are typical municipal water use in the United States Report. ( (George Tchobanoglous and Franklin L. Burton, 1991) Table 1 Municipalities water use 3.1 Domestic water use:. Domestic water use encompasses the water supplied to residential areas ,and commercial districts, institutional facilities, and recreational facilities as a measured by individual water meters .The uses to which this water is put include drinking, washing, bathing, culinary, and waste removal, and yard watering these kind of water collected from household sewage. Using the average flow values reported in above table of the water used in a municipal water supply system is for domestic purposes. 3.2 Residential areas: The water normally used by residential households consists of water for interior use such as showers and toilets and water for exterior use such as lawn watering and car washing, the household wastewater mostly used in sewage treatment plant. Typical data for interior water use are presented in below table. How much amount of water used in residential areas water use for exterior applications varies widely depending upon the geographic location, climate and time of year and mainly consists of landscape irrigation. The Residential areas 100% of water normally used by typical distribution of residential interior water use the following table given details Table 2 Typical distribution interior water use (George Tchobanoglous and Franklin L. Burton, 1991) 3.3 Commercial facilities: The water used by commercial facilities for sanitary purposes will vary widely depending on the type of activity means example of offices and compared to a restaurant. Typical water use values for various types of commercial facilities are reported in following table also for large commercial water using facilities such as laundries and car washes, careful estimates of actual water use should be made. Table 3 Typical rates of water use for commercial facilities (George Tchobanoglous and Franklin L. Burton, 1991) 3.4 Institutional facilities: Water used by facilities such as hospitals, schools and rest home is usually based on some measure of the size of the facility and the type of housing function provided example of per student or per bed, and water normally use for schools will vary significantly depending on whether the students are housed on campus or are day students. The representative water use values for institutional facilities are reported following table. Table 4 Typical water-use values for institutional facilities (George Tchobanoglous and Franklin L. Burton, 1991) 3.5 Recreational Facilities: The recreational facilities mostly water used in such as swimming pools, bowling alleys, and camps, resorts, then country clubs perform a wide range of functions involving water use. The following table typical water use values are reported. Table: Typical water-use values for recreational facilities (George Tchobanoglous and Franklin L. Burton, 1991) 4. SEWAGE TREATMENT PLANT: 4.1PRINCIPLE: Sewage treatment plant there are two main types of biological reaction, depending upon the presence or absence of free oxygen, the aerobic reaction takes place only in the presence of free oxygen and produces stable, relatively inert end products. Anaerobic reaction are more complex, being two stage, proceeding relatively slowly and leading to end products which are unstable and which still contain considerable amounts of energy. In any biological reaction the energy in the organic matter, used as food by the microorganisms, is split three ways; some is used in creating new microorganisms, some is incorporated in the end products of the reaction, the proportions of energy in the three areas depend upon the nature of the reaction, the type of organic matter, the type of microorganisms,and environmental conditions. The organic matter in wastewater thus provides the well as providing the energy for the oxidation reactions which releases the end products of biological treatment. (THY Teb butt,1990). Domestic sewage satisfies all these requirements but some industrial wastewaters may be lacking in nutrients or other factors, which could result in inhibition of biological activity, Toxic substances present in the wastewater can also mean that biological treatment of an organic wastewater is ineffective, although it is sometimes possible for microorganisms to become acclimated to substances which initially appear to be toxic. The aim of conventional biological treatment processes is to achieve almost complete removal of the organic matter in the feed. The activated sludge system is a common form of dispersed growth reactor, and both systems require a settling facility to remove the excess biological solids produced in the process. In the case of fixed film systems the solids are essentially dead cells, but with the dispersed growth activated sludge systems the bulk of the cells are living and are returned to the reactor for re use, only the excess solids being removed. (THY Tebbut t,1990). Characterstics of waste water sewage treatment plant:  · Bio chemical oxygen demand  · Total dissolved solids  · Chemical oxygen demand  · Total suspended solids  · PH  · Bio chemical oxygen demand: It is a measure of the amount of oxygen that bacteria will consume while decomposing organic matter under aerobic conditions.  · Total dissolved solids: It comprises inorganic salts and small amounts of organic matter that are dissolved in water. The principle constituents are usually the captions , calcium, magnesium, sodium, and potassium and the anions carbonate, bicarbonate, chloride, sulphate and particularly in groundwater nitrate.  · Chemical oxygen demand: It is a measure of the total quantity of oxygen required to oxidize all organic material into carbon dioxide and water. * Total suspended solids: It is a measure of the suspended solids in waste water, effluent, or water bodies determined by tests for Total suspended non-filterable solids.  · PH: It is a measure of the acidity or alkalinity of a solution numerically equal to 7 for neutral solutions increasing with increasing alkalinity and decreasing with increasing acidity. The PH scale commonly in use ranges from 0 to 14. ( www.answers.com ) Classification of Waste Water Treatment Methods The wastewater treatment is contaminants are removed by physical, chemical and also biological methods. Sewage Treatment Plant individual methods usually are classified as a physical unit operations, chemical unit operations and also Biological unit operations and processes. Although these operations and processes occur in a variety of combinations in Treatment Systems. (George Tchobanoglous, FranKlin L.Burton, 1991,1979,1972) 4.2 Physical operations unit: The Treatment methods in which the application of physical forces to predominate are known as physical operation unit. Because most of these methods involved directly from the first observations of a nature, and they were the first to be used for wastewater .treatment. These are the Screening, Mixing, Flocculation, Flotation,sedimentation,Filtration,and Gas transfer are typical unit operations. (George Tchobanoglous, FranKlin L.Burton, 1991,1979,1972). Screening: The first off all unit operation entered in wastewater treatment plants is screening .a screen is a device with openings ,generally of uniform a size, that is using to retain the coarse solids found in wastewater. Description: The screening elements may consists of parallel bars, wires or ,grating, rods, mesh, or perforated plate ,a screen composed of parallel bars or rods is called a bar rack sometimes called a bar screen). The term screen is used for screening devices consisting of perforated plates wedges wire elements and wire cloth. The materials removed by these devices are known as screenings. Bar Racks: In Wastewater treatment, bar racks are used to protect the Pumps pipelines valves and other appurtenances from the damaged or clogging by a rags and large objects. Screens: Sewage treatment plant is widely used to Barscreening,early screens were of the inclined disk or drum type, whose screening media consisted of bronze or copper plates with milled slots ,and were installed in place of sedimentation tanks for primary treatment .since the early 1970s,there has been resurgence of interest in the field of wastewater treatment in the use of screens of all types ,the application range from primary treatment to the removal of the residual suspended solids from biological treatment processes. (George Tchobanoglous, FranKlin L.Burton, 1991,1979,1972) Mixing: Mixing is an important unit operation in many phases of wastewater treatment including (1)the mixing of one substances completely with another, (2)the mixing of liquid suspensions,(3)the blending of miscible liquids,(4)flocculation and (5)heat transfer .chemicals are also mixed with sludge to improve tidal watering characteristics. In anaerobic digestion, mixing is used accelerate the biological conversion process and to heat the contents of the digester uniformly . Description Apparatus: Most mixing operations in wastewater can be classified as continuous rapid or continuous. Continuous -rapid mixing is used most often where one substance is to be mixed with another. Continuous mixing is used where the contents of reactor or holding tank or basin must be kept in suspension. Energy dissipation mixing: The power input per unit volume of liquid can be used as a rough measure of mixing effectiveness, based on the reasoning that more input power creates greater turbulance,and greater turbulence leads to better mixing. Sedimentation:: It is one of the most widely used in waste water treatment, sedimentation is the separation from the water, by gravitational settling, of suspended solids that are heavier than water, it is one of the most widely used unit operations in wastewater treatment .A Sedimentation basin may also be referred to as a sedimentation tank, settling basin ,or settling tank, Sedimentation is used for grit removal, particularly floating matter removal in the primary settling basin, biological float removal in the activated sludge and settling basin and chemical flog removal. Whenever the chemical coagulation processes is used. 4.3 Chemical unit processes: Sewage treatment plant is widely used to chemical unit processes ,This Treatment Methods in which the removal or conversion of the contaminants is brought about by the chemicals or by other chemical reactions are known as a chemical processes unit. There are three different types chemical processes used in the wastewater treatment.Precipitation,and disinfection and adsorption, which the process mostly used in the wastewater treatment. In the chemical precipitation ,treatment is also accomplished by producing a chemical precipitate that will settle. In most cases the settled precipitate will contain the both constituents that may have reacted with the adding to chemicals and the substance that were swept of wastewater as the predicated settled in the water. (George Tchobanoglous, FranKlin L.Burton, 1991,1979,1972) 4.4 Chemical coagulation: The settlement of fine colloidal and suspended solids can be assisted by the use of flocculation as but with dilute suspensions, such as lowland river waters, the opportunities for collisions and agglomeration are limited. In such circumstances flocculation does not significantly improve the settling characteristics of the suspension. the addition of a chemical coagulant, which precipitates flocculent solids in the water, followed by flocculation and sedimentation, can provide a high degree of clarification. the processes of chemical coagulation is thus carried out in a sequence of operations, the first of which involves rapid to permit enmeshment of the colloidal solids in the rapidly precipitating flock. (THY Tebbutt, 1990) Following the initial stage precipitation stage, the suspension is passed to flocculation and sedimentation units, which may be separate or combined. the most popular coagulant for potable water treatment is aluminum sulphate, often referred to as alum. When it is added to water in small doses of around 20-50mg/l,a reaction takes place with the natural alkalinity present, and insoluble aluminum hydroxide is formed. this responds well to controlled flocculation. The chemical reactions which occur are complex but may be simplified as Al2(SO4)3 +3Ca(HCO3)2 = 2Al(OH)3 + 3CaSo4 +6CO2 When using the commercial alum which has 16-18 molecules of water of crystallization, and expressing alkalinity in terms of calcium carbonate, each mg/l of alum reacts with 0.5mg/l of alkalinity. By using a range of coagulant does and PH values ,it is possible to determine the optimum conditions to achieve the required water quality. (THY Tebbutt, 1990) Chemical precipitation: In essence ,chemical precipitation depends upon the use of an added reagent which combines with the impurity to be removed to give an insoluble product which can then be removed by sedimentation, preceded by flocculation if necessary. A(impurity) + B(reagent) = C (precipitate) + D(by product) It is clearly essential that any byproduct of the reaction does not itself have undesirable properties in relation to the eventual use of the water or wastewater. It is also important to remember that chemical precipitation processes produce sludges containing the impurities and that the cost of handling and disposing of these sludges in a safe manner can be significant. (THY Tebbutt, 1990) Disinfection: Disinfection refers to the selective destroy of disease causing organism .all the organisms are not destroyed of during the process; this differentiates disinfection from sterilization, which is the destruction of all organisms. In the field of waste water treatment, there are three categories of human enteric organisms of the greatest consequence in producing disease are viruses, bacteria, and amoebic cysts. Disinfection is widely used to wastewater sewage treatment plant; there are well -established links between the contamination of drinking water with facial matter and the incidence of such water related diseases as cholera, typhoid and many gastrointestinal infections. Thus the removal of the pathogenic microorganisms from water supplies is a very valuable measure for the improvement of public health. Disinfection means the destruction of pathogenic microorganisms and does not necessarily mean that the water is sterile, since a small number of harmless microorganisms are usually present in tap water and poses no hazard. For most disinfection the rate of kill is given by dN/dt = -KN where k = rate constant N = number of living microorganisms The rate constant varies with the particular disinfectant, its concentration, the organism being killed,PH,Temperature,and other environmental factors. (THY Tebbutt, 1990) 5. Biological unit processes: Sewage Treatment plant is widely used to Biological unit processes ,this is processes is remove the microorganism of the water, In this Treatment methods in which the removal of contaminants is bring about by biological activity are known as a biological unit processes. Biological treatment is used primary to remove the biodegradable organic substances matter (means colloidal or dissolved )in wastewater.Basically,these substances matter are converted into the gases that can be escaped to the atmosphere and into the biological cell tissue unit that can be removed by settling. At the same time this treatment is also used to remove the nutrients (means nitrogen and phosphorous) in wastewater. (George Tchobanoglous, FranKlin L.Burton, 1991,1979,1972) 5.1 Components of wastewater Flows The components of the wastewater flows that make up the wastewater flow from a community depend on the type of collection system used and may include the following: There are four types of wastewater flows available in the wastewater treatment. 1. Domestic (is also called sanitary) wastewater. This is kind of wastewater discharged from residences and from commercial,instutional , and house hold sewage toilet waste water, bath, sinks ,and canteen wastewater and similar facilities. 2. Industrial wastewater .this kind of wastewater in which industrial wastes predominate. 3. Infiltration/inflow .water that enters the sewer system through the indirect and direct means. The Infiltration is extraneous water enters that the sewer system through the leaking joints. 4. Storm water. Runoff resulting from rainfall and snowmelt. This kind of components of wastewater flows essentially used in the sewage treatment plant. 5.2 Waste water treatment: There are four different types of wastewater processing in available in sewage treatment plant. Primary treatment referred to physical unit operations. Secondary treatment referred to chemical and Biological unit process, and also Advanced or tertiary referred to combinations of all four other processing.  · Preliminary wastewater treatment: Preliminary wastewater treatment is defined as the removal of wastewater constituents that may causes to maintenance of the operational problems with the treatment of the operations. Examples of preliminary operations are screening and commutation for the removal of debris (J.Staudenmann, A. Schonborn, C. Etnier, 1996).primary wastewater treatment: In primary wastewater treatment, a portion of the suspended solids and organic material is removing from the waste water. This removal is usually accomplished with physical operations such as screening and sedimentation. The effluent from primary treatment will ordinarily contain considerable organic matter and will have relatively high BOD.treatment plants using only primary treatment will be phased out in the future as implementation of the EPA secondary treatment requirements is completed. Rare instances (for those communities having a secondary treatment waiver)will primary treatment be used as the sole method of treatment .the principal function of primary treatment will continue to be as a precursor to secondary treatment . * Conventional secondary wastewater treatment: The secondary treatment is directed principally toward the removal of bio degradable organics and suspended. Disinfection is included frequently in the definition of conventional secondary treatment is defined as the combination of processes customarily used for the removal of these constituents and includes biological treatment by activated sludge fixed film reactors, or lagoon systems and sedimentation.  · Advanced wastewater treatment/wastewater reclamation: Advanced wastewater treatment is defined as the level of treatment required beyond conventional secondary treatment to removing constituents of concern including toxic, nutrients, compounds, and larger amounts of organic material and suspended solids .In addition to the nutrient removal processes, unit operations or processes frequently employed in advanced wastewater treatment are chemical coagulation, flocculation, and sedimentation followed by filtration and multi grade filter and also activated carbon filter. (George Tchobanoglous, FranKlin L.Burton, 1991,1979,1972). 6. STP BASED ROTATING BIOLOGICAL CONTACTORS: 6.2 Principle: A Rotating biological contactor (RBC) is constructed of bundles of plastic packing attached radically to a shaft, forming a cylinder of media .the shaft is placed contour bottomed tank so that the media are submerged approximately 40 percent. the contactor surfaces are spaced so that during submergence in wastewater can enter the voids in the packing .when rotated out of the tank ,the liquid trickles out of the voids in the packing. when rotated out of the tank the liquid trickles out of the voids between surfaces and is replaced by air. A fixed film biological growth, similar to that on a trickling filter packing, adheres to the media surfaces. Alternating exposure to organics in the wastewater and oxygen in the air during rotation distributor. Excess the biomass sloughs from the media and is carried out in the processes effluent for gravity separation. A treatment system consists of primary sedimentation preceding and final sedimentation following the rotating biological contactors. Since the recirculation through RBC units is not normally practiced, only sufficient underflow from the final clarifier is returned to allow removal of excess of the biological solids in primary sedimentation and waste sludge similar to the character to the from trickling filter plant ,in withdrawn from the primary clarifiers disposal of waste. In large type of plants, a common shaft is placed over a contoured tank with the wastewater flow parallel to the shaft. A series of four stages are normally installed in the treatment of domestic wastewater for BOD reduction. additional stages may be added to initiate nitrification .Each stage acts as a completely mixed chamber and the movement of the wastewater through the series of tanks simulates plug flow. Biological solids washed off of the media are transported hydraulically under the baffles to be carried out with the effluent.RBC units are protected by installation either in a building with adequate ventilation or under separate plastic covers lined with insulation. The efficiency of BOD removal of in the processing domestic wastewater is based on empirical data from operating RBC plants. the Mathematical equations also have been developed ,but their prediction of the performance is not consistently reliable. the typically recommendations for secondary treatment of domestic wastewater to produce an effluent of less than 30 mg/l of BOD and also 30mg/l of suspended solids. (Mark J.Hammer Mark J.Hammer,Jr, 1996) TECHNICAL DETAILS OF RBC: DESCRIPTION MOC / MAK 1. Polymer sheet die 2m x 2 thk special polymer from Germany 2. RBC Trough poly propylene /FRP 3. RBC Support MS Resin Coated 4. Geared Motor (0.75HP) FLENDER 5. Input Coupling Love Joy 6. Drive Support Mild Steel 7. Bush Nylon 8. Shaft SS304 TANK SCHEDULE OF RBC : The following tanks used in sewage treatment plant based Rotating Biological contactor Processes. 1. Bar screen 2. Collection Tank 3. PIT 1,2,3 4. Flow divider 5. Sludge drying bed 6. Semi Treated water tank 7. Multi grade sand filter 8. Activated carbon filter 9. Treated water tank EQUIPMENT SCHEDULE The following equipments used in sewage treatment plant based Rotating Biological contactor processes. DESCRIPTION MODEL/HP QTY RBC 0.75 hp 1 Submersible Pump 1 Hp 2 Submersible Pump (Lamella) 1 Hp 1 Filter feed submersible pump 3 Hp 2 7. ROTATING BIOLOGICAL CONTACTOR PROCESS(60 KILO LITRE PER DAY): 2D 8. WATER CONSUMPTION ANALYSIS OF SEWAGE TREATMENT PLANT: Raw sewage characteristics: Domestic waste water: The volume of a wastewater from a community varies from 50 to 250 gal capital per day depending on the sewer system uses. A common values for domestic wastewater flow is 120 gpcd means 450 liter person per day use, which assumes that the residential waste water have modern water using appliances, such as automatic washing machines. the organic substances matter contributed per person per day in domestic wastewater is approximately 0.24 lb to 110gram of suspended solids and 0.20lb and 90 gram of BOD in communities where a substantial portion of the household kitchen wastes is designed is discharged to the sewer system through garbage grinders. In selection of data for design, the quantity of and organic strength of wastewater should be based on actual measurements taken through the year to account for variations resulting from seasonal climatic changes and other factors. the average values during the peak month may be used for design ,excluding un usual infiltration and inflow, the av erage daily sanitary wastewater flow during the maximum month of the year is commonly 20 to 30 percent greater than the average annual daily flow, excluding seasonal industrial wastes, the average daily BOD load from sanitary wastewater during the maximum month is greater than the annual ave

Thursday, September 19, 2019

Luxury fror less :: essays research papers

Luxury for Less   Ã‚  Ã‚  Ã‚  Ã‚  For many American’s today, the stress of finding a good deal on a car seems far from relieving. But nowadays believe it or not, finding a car that gives you a â€Å" bang for your buck† could quite possibly be at your nearest Nissan dealership. With outrageous gas prices and unpredictable weather, the sleek looking 2005 Nissan Sentra SE offers the affordability, performance, and modern appearance that most high-end vehicles offer as well.   Ã‚  Ã‚  Ã‚  Ã‚  With current gas prices across the country rising daily, the 2005 Nissan Sentra SE offers affordability with maintaining 37 mpg for highway mileage, along with 29 mpg for city mileage. Not only is this vehicle gas efficient but it is also finically efficient. The 2005 Nissan Sentra SE is currently retailing under $18,000, including full packages with powered features and great warranties.   Ã‚  Ã‚  Ã‚  Ã‚  Since 99% of the time spent in our vehicles is while driving, owning a vehicle with good performance is important. Not only does it affect the driving experience, but can also lead to stress and hassle if the vehicle isn‘t reliable. Included with the purchase of the 2005 Nissan Sentra SE, is a 100,000 mile power train warranty, insuring that mostly all of the components of the vehicle are covered. Allowing you to drive comfortably knowing your safe. With safety in mind, the 2005 Nissan Sentra SE is also equipped with both driver and passenger side airbags, and along with an ABS breaking system, which enables the vehicle’s break system to function more stable and quickly in case of an emergency. But the most important test for any vehicle’s performance, is how it handles in substantial weather conditions.

Wednesday, September 18, 2019

Philosophy in the South Asian Subcontinent: A Unity in Maladjustment :: Philosophical Globalization Essays

Philosophy in the South Asian Subcontinent: A Unity in Maladjustment ABSTRACT: Philosophy in the south Asian subcontinent differs from Western philosophy in the following three ways: (1) it is based upon religion; (2) love of tradition becomes an obstacle for philosophical development; and (3) authority is accepted as a source of knowledge. I argue that future philosophical development demands that the above three differences be removed. Furthermore, philosophers from the subcontinent must concentrate on contemporary issues. If I ask myself about the extent of the philosophical heritage, which I may claim to have inherited from the past, I shall find myself in a difficulty in finding a precise answer. If I look back for my heritage, beyond fifty years towards the past, I shall find that the past heritage to which I belong, incidentally coincides with that of the South Asian subcontinent. In the context of philosophy, that heritage is what we find mainly in the traditions of the Vedic philosophical schools (specially the Vedanta school), Buddhism and Jainism. These philosophical traditions are also considered as oriental philosophies. An orientalistic outlook in the context of these philosophical traditions may find it difficult to draw a line of demarcation between the past and the present status of these traditions. It is my intention to draw attention to the fact that, in the context of philosophy, our past heritage is in a sense an obstacle to our future progress; and to this extent, our heritage and our future are in a unity in maladjustment. I shall draw attention to some historical situations, and some claims of heritage based on these situations. It is claimed that, it is possible 'to trace the rise of philosophy to a period earlier than the Greeks...'. (1) This claim may lead to wonder whether Thales is the father of philosophy. In this context it is further claimed that: 'The first Greek thinker whom we can appropriately describe as a philosopher was Thales', and that 'When, however, we look at India of the sixth century B.C., we see a completely different picture. ... It was not a case of the dawn of philosophy as in Greece but what may be described as the full glow of philosophical day'. (2) What implications are meant to follow from such claims? Can we say that W. T. Stace is wrong in claiming that Thales is the father of philosophy? (3) Should one rather say that Thales is in fact the father of western philosophy only? Philosophy in the South Asian Subcontinent: A Unity in Maladjustment :: Philosophical Globalization Essays Philosophy in the South Asian Subcontinent: A Unity in Maladjustment ABSTRACT: Philosophy in the south Asian subcontinent differs from Western philosophy in the following three ways: (1) it is based upon religion; (2) love of tradition becomes an obstacle for philosophical development; and (3) authority is accepted as a source of knowledge. I argue that future philosophical development demands that the above three differences be removed. Furthermore, philosophers from the subcontinent must concentrate on contemporary issues. If I ask myself about the extent of the philosophical heritage, which I may claim to have inherited from the past, I shall find myself in a difficulty in finding a precise answer. If I look back for my heritage, beyond fifty years towards the past, I shall find that the past heritage to which I belong, incidentally coincides with that of the South Asian subcontinent. In the context of philosophy, that heritage is what we find mainly in the traditions of the Vedic philosophical schools (specially the Vedanta school), Buddhism and Jainism. These philosophical traditions are also considered as oriental philosophies. An orientalistic outlook in the context of these philosophical traditions may find it difficult to draw a line of demarcation between the past and the present status of these traditions. It is my intention to draw attention to the fact that, in the context of philosophy, our past heritage is in a sense an obstacle to our future progress; and to this extent, our heritage and our future are in a unity in maladjustment. I shall draw attention to some historical situations, and some claims of heritage based on these situations. It is claimed that, it is possible 'to trace the rise of philosophy to a period earlier than the Greeks...'. (1) This claim may lead to wonder whether Thales is the father of philosophy. In this context it is further claimed that: 'The first Greek thinker whom we can appropriately describe as a philosopher was Thales', and that 'When, however, we look at India of the sixth century B.C., we see a completely different picture. ... It was not a case of the dawn of philosophy as in Greece but what may be described as the full glow of philosophical day'. (2) What implications are meant to follow from such claims? Can we say that W. T. Stace is wrong in claiming that Thales is the father of philosophy? (3) Should one rather say that Thales is in fact the father of western philosophy only?